Connection & Settings

Atención

Es importante configurar la posición del interruptor DIP en DCF.

Connect the DCF receiver (AD 650) to the clock terminal board placed on the anchoring plate (LINE IN terminal) using an unshielded two-wire cable with double insulation (a 10 m cable is included in the delivery). The maximum length of the cable depends on its cross-section (at least 0.25 mm²) and can be up to 200 m. We recommend using shielded cable only in critical conditions.

The functionality of the receiver is independent of the connection polarity. Cut the cable to the required length.

With good reception, the LED on the receiver flashes once per second with a skip of 1 pulse at the 59^th second.

Conexión estándar

Color del cable	Conector
Blanco	LINES +
Marrón	LINES −

Conexión ECO-DC

Atención

Connect one pin (LINES+ or LINES-) to the PE conductor.

Color del cable	Conector
Blanco	LINES IN +
Marrón	LINES IN −
Yellow / Green (PE conductor)	Either LINES IN + or LINES IN −

Ajustes del reloj digital

1. Enter the digital clock menu, navigate to the SYNC submenu and proceed to enter.

2. Navigate to item o1 and set it to value A (autodetection).

3. Navigate then to item o2 and set it to value A (autodetection).

4. Return to digital clock menu, navigate to the dISP submenu and proceed to enter.

5. Navigate to item d2 and set it to value A (automatically set timezone).