Network Clock Operation#
Clock supports IPv4 and IPv6 protocols. You can disable individual protocols by setting values in IP mode in network settings. Default clock setting allows both protocols at the same time – the NEt menu item n1 is set to value 0 (see IP Modechapter).
Note
For IPv4 mode, DHCPv4 is enabled by default – the NEt menu item n3 is set to value 1 (see DHCPv4 Mode chapter).
IPv6 mode allows up to 4 different priority IP addresses in downwards order:
DHCPv6
manually configured IP address (fix)
autoconfiguration (SLAAC / RA)
local address link
Note
For IPv6 mode, DHCPv6 and autoconfiguration (SLAAC) are enabled by default:
- DHCPv6:
NEt menu item 11 is set to value 1 (see DHCPv6 Mode chapter)
- SLAAC:
NEt menu item 10 is set to value 1 (see Address Autoconfiguration (SLAAC) chapter)
Default Network Parameters#
Parameter |
Value(s) |
|---|---|
IP Mode |
IPv4 / IPv6 |
IPv4 Address |
0.0.0.0 |
IPv4 Subnet Mask |
0.0.0.0 |
IPv4 Default Gateway |
0.0.0.0 |
NTP Server Address 1 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
NTP Server Address 2 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
NTP Server Address 3 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
NTP Server Address 4 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
NTP Request Time [s] |
10 |
DNS Manager |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
SNMP Manager 1 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
SNMP Manager 2 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
Multicast Config Address |
239.192.54.1 / FF38::EFC0:3601 (FF38:239.192.54.1) |
Alive Notifications Interval [min] |
30 |
Configuration Port Number |
65532 |
Timezone Client Port Number |
65534 |
DHCPv4 |
enabled |
SNMP |
enabled |
Multicast Support |
enabled |
IPv6 Fix Address / Prefix |
0:0:0:0:0:0:0:0 / 64 |
IPv6 Link Local Address |
fe80 :: 2 [2nd octet MAC]: [3rd octet MAC] ff: fe [4th octet MAC]: [5th octet MAC] [6th octet MAC] |
DHCPv6 |
enabled |
Autoconfiguration (SLAAC) |
enabled |
Web Server |
enabled |
Web Server Password |
mobatime |