Network Clock Operation#
Clock supports IPv4 and IPv6 protocols. You can disable individual protocols by setting values in IP mode in network settings.
Default clock setting allows both protocols at the same time – NEt menu item n1 set to value 0.
Note
For IPv4 mode, DHCPv4 is enabled by default – NEt menu item n3 is set to value 1.
IPv6 mode allows up to 4 different priority IP addresses in downwards order:
DHCPv6
manually configured IP address (fix)
autoconfiguration (SLAAC / RA)
local address link
Note
For IPv6 mode, DHCPv6 and autoconfiguration (SLAAC) are enabled by default:
- DHCPv6:
NEt menu item n11 is set to value
1.
- SLAAC:
NEt menu item n10 is set to value
1.
Default Network Parameters#
Parameter |
Value(s) |
|---|---|
IP Mode |
IPv4 / IPv6 |
IPv4 Address |
0.0.0.0 |
IPv4 Subnet Mask |
0.0.0.0 |
IPv4 Default Gateway |
0.0.0.0 |
NTP Server Address 1 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
NTP Server Address 2 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
NTP Server Address 3 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
NTP Server Address 4 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
NTP Request Time [s] |
10 |
DNS Manager |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
SNMP Manager 1 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
SNMP Manager 2 |
0.0.0.0 / 0:0:0:0:0:0:0:0 |
Multicast Config Address |
239.192.54.1 / FF38::EFC0:3601 (FF38:239.192.54.1) |
Alive Notifications Interval [min] |
30 |
Configuration Port Number |
65532 |
Timezone Client Port Number |
65534 |
DHCPv4 |
enabled |
SNMP |
enabled |
Multicast Support |
enabled |
IPv6 Fix Address / Prefix |
0:0:0:0:0:0:0:0 / 64 |
IPv6 Link Local Address |
fe80 :: 2 [2nd octet MAC]: [3rd octet MAC] ff: fe [4th octet MAC]: [5th octet MAC] [6th octet MAC] |
DHCPv6 |
enabled |
Autoconfiguration (SLAAC) |
enabled |
Web Server |
enabled |
Web Server Password |
mobatime |
Content#
Unicast mode
Multicast mode
Network parameters assigned by DHCPv4
Manual settings through setup menu
Link Local Address calculation
Setting network parameters over autoconfiguration (SLAAC)
Setting network parameters over DHCPv6
SNMP
HTTPS
WiFi Operation Modes