Current Limits#

Setting of current limits for outputs.

In Service menu press the > button to select Current limits and proceed to enter its setting by pressing v button.

The display shows following:

L1: 250 DC: 50
Accu: 50 A: 0.1W

L1: 250:: Current limit for slave line (current, which is reached, master clock reports overload state)

DC: 50:: Current limit for 24 V output
Accu: 50:: Current limit for Accu (14 V) output
A: 0.1W:: Available power in Watts, which can be distributed into ouputs (cannot be set)

The current limits are in mA.

Summary available power (A:) is calculated by formula:

P[W] = 8.3 – Accu[A] × 14 + (Line[A] + DC[A]) × 25

Button function

Button function in ‘item edit’ mode

< >:: Move between items
+ -:: Switch flasing item (holding down the button will cycle through the options)
v:: Save edited values and return to page view
x:: Exit without save and return to page view

After setting desired current limits, press the v button to confirm your choice. The display shows Saved and returns to page view.

Default Values#