Screen LINE

This screen shows the operation state of the slave line (analogue or digital clock), to display this screen, press the > button from the screen MASTER.

The display shows following:

L1       running
12:00        min

L1:

Line

running:

Line state

12:00:

Line time

min:

Line type

Button function

-:

Stop / start slave line

+:

Enter slave line time settings

Note

Impulse lines only.

v:

Enter slave line setting (see Slave Line Settings chapter)

Slave line states

stop:

Line is stopped, it is possible to set the line time

running:

Normal line operation

fast fwd:

Accelerated catch-up time

waiting:

Line in waiting mode; time necessary to correct the time of slave clocks is shorter than time necessary for accelerated catch-up cycle

overload:

Line is overloaded or short circuit on line

12pos+stop:

Accelerated catch-up cycle with automatic stop on 12:00

Setting the Time of Slave Line

Set the slave pulse line type in stop mode. Set the same time on all slave clocks before starting the line. Enter this time as the slave time.

To enter this setting, press the + button from screen LINE (see Slave Line Settings chapter).

Button function

< >:

Move between items

+ -:

Switch flasing item (holding down the button will cycle through the options)

v:

Save edited values and return to LINE screen

x:

Exit without saving

Set the slave impulse line in following format:

Minute impulse line:

hh:mm

Half-minute impulse line:

hh:mm:00 or hh:mm:30

Seconds impulse line:

hh:mm:ss