Screen MASTER

Main / basic screen. From all “screens” you can jump back into the MASTER screen by operating the x button.

The display shows following:

10:08:57 Fr I #Ą
25.04.2025s  USB

10:08:57:

Time

Fr:

Day of week

I:

Channel status indication (one or more are active)

#:

Indication of some locked channels

Ą:

Indication of alarm(s) in alarm history

25.04.2025:

Date

s:

DST indication

USB:

USB indication

Button function

-:

Correction of seconds ±30 s: pressing - between 0–30 sec. resets the seconds to 00; between 31–59 sec., it rounds forward to 00 of the next minute

+:

Enter to manual time and date setting

v:

Enter to Main menu

hold x and press v:

Manual channel switching

Manually Set the Time and Date

Set the time and date manually when operating without a DCF or a GPS receiver.

The display shows following:

00:00:00        
01.01.2025      

00:00:00:

Time

01.01.2025:

Date

Button function

v:

Save entered values and return to MASTER screen

x:

Exit without saving

Press the + button. The cursor flashes now on the position of the hours. Enter the time value in the hh → press the > button → mm form using + and - buttons. The cursor in now blinking on the date position. Enter the date in the dd → press the > button → mm → press the > button → yy form.

Confirm the values set up by pushing the v button.

Day of the week and DST status are set automatically according to the selected time zone. The setting is described in Time Zone Settings.