Program / Manually

In Main menu press the > button to select Channel setup and proceed to enter its setting by pressing v button.

This menu is used to set the manual switching mode of the channel.

Note

To assing channel CH1 to program / manuall switching, you first need to “free” the channel by changing its value to ‐‐‐ in Switching Illumination by Calculated Sunrise and Sunset Time menu.

The display shows following:

Man          CH1
Push btn   0:00m

Man:

Channel setting

CH1:

Selected channel

Push btn:

Switching mode

0:00m:

Predefined period when timer is selected

Button function in ‘item edit’ mode

< >:

Move between items

+ -:

Switch flasing item (holding down the button will cycle through the options)

v:

Save edited values and return to page view

x:

Exit without save and return to page view

Switching Mode Options

You can set following switching modes:

timer:

By simultaneously pressing the x and v the channel will switch to predefined period 00:01–15:59 (MM:SS)

on / off:

Press the buttons to turn on, press the buttons again to turn off

Push btn:

The channel is switched on while the buttons are held (default)

Channel Selection

You can set following channels:

CH1, ‐‐‐: