Line Parameters#

Setting parameters of impulse slave.

In Service menu press the > button to select Line parameters and proceed to enter its setting by pressing v button.

The display shows following:

Vtg level:  24 V
Bipolar       L1
Vtg level: 24 V:

Voltage level

Bipolar:

Polarity

L1:

Set line

Button function

v:

Enter item setting

x:

Return to Service menu

Button function in ‘item edit’ mode

< >:

Move between items

+ -:

Switch flasing item (holding down the button will cycle through the options)

v:

Save edited values and return to page view

x:

Exit without save and return to page view

After setting desired line parameters, press the v button to confirm your choice. The display shows Saved and returns to page view.

Default Values#

Voltage level:

Vtg level: 24 V

Polarity:

Bipolar

Available Values#

Voltage level:

  • 24 V

Polarity:

  • Bipolar – polarity of impulses is changed

  • Unipolar – polarity of impulses is not changed