Stopwatch End Time#

Added in version r8.17.

Menu navigation

Menu:: StoP
Item:: Endt
Values:: submenu

This setting defines the end time for upwards counting. The stopwatch stops when the set time is reached.

If relay activation (menu item h4) is enabled, the relay is switched on for the defined duration at that moment.

Submenu for Setting the Stopwatch End Time#
Displayed Item	Value(s)	Description	Range
`HH:MM`	`HH`	Hour setting	Range 0–99
`HH:MM`	`MM`	Minute setting	Range 0–59
`SS.HsHs`	`SS`	Seconds setting	Range 0–59
`SS.HsHs`	`HsHs`	1/100 second setting	Range 0–99

The default end time is set to 99:59:59.990.

Note

The available time settings depend on the selected counting unit (menu item h3). According to the set counting unit, some fields are disabled and shown as dashes (--).

If h3:1 (1/100 second unit) is set: setting format HH:MM and SS.HsHs, maximum 99:59:59.990.
If h3:2 (second unit) is set: setting format HH:MM and SS.--, maximum 99:59:59.000.
If h3:3 (minute unit) is set: setting format HH:MM and --.--, maximum 99:59:00.000.
If h3:4 (day unit) is set: setting format DD:DD and --.--, maximum 9999 days.

Days are set as first two-digit field × 100 + second two-digit field.