Connection to Digital Clock#
To the digital clock, one or two sensors TPH 1m (or combination of TPH 1m + any other sensor) can be connected. In the case of two temperature sensors, they share a common power supply.
The sensor TPH 1m is connected to the TEMP terminal block on digital clock PCB.
Connecting a Single Sensor#
Wire Color |
TEMP Terminal |
|---|---|
● Red |
+ |
● Yellow |
TEMP1 |
● Black |
− |
Connecting Two Sensors#
Caution
Two TPH 1m sensors are not supported for generation 3 digital clock.
Wire Color |
TEMP Terminal |
|---|---|
● Red (both sensors) |
+ |
● Yellow (sensor 1) |
TEMP1 |
● Yellow or ● Blue (sensor 2) |
TEMP2 |
● Black (both sensors) or ● White (sensor 2) |
− |
