Overview#

Carillon#

The carillon allows the creation of up to 15 one to four-tone melodies. Carillon melodies are created by striking percussion hammers on bells or cymbals. These melodies can be triggered by a set weekly program or by buttons to start the carillon instantly.

Basic Properties#

  • 1 to 4 tone carillon for 1–4 hammers.

  • Up to 15 melodies can be programmed.

  • Maximum length of one melody 999.9 s.

  • Maximum number of entries in all melodies 1000.

  • Melodies can be triggered based on a preprogrammed weekly program or with up to two externally connected buttons.

  • The carillon is controlled from the control clock.

SIM Ring Simulation Mode#

In this mode, recordings are repeated periodically in up to four sequences (S01–S04). The mode allows up to four tones to be triggered simultaneously without interdependence. This mode considers only the first records of sequences S01–S04, if any. For proper operation, set the offset in the records to a value other than zero. A repeat of the record occurs after the end of the beat from the previous repeat.

1

Example of ringing simulation according to factory preset sequences:

Strike length:

200 ms

Offset:

S01=1 s / O1; S02=2.2 s / O2; S03=1.3 s / O3

Strike times:

1.0 s (O1); 1.3 s (O3); 2.2 s (O1 + O2); 2.8 s (O3); 3.4 s (O1); 4.3 s (O3); 4.6 s (O1 + O2)

Design#

  • Basic design for switchboard:

    • DIN rail 12M.

  • Indoor:

    • Switchgear 18M, IP 55, wall mounted.

  • Outdoor:

    • Switchgear 18M, IP 65, wall mounted.