Control#

The clock is set and controlled by two push-buttons or by remote controller. Position of push-buttons depends on the clock type. Push-buttons are mostly located on the upper side of the frame.

Push-buttons#

Button

Description

Function

PB1

Push-button 1 (short press)

  • Moving “up” in menu / submenu

  • Decreasing of set value

PB1L

Push-button 1 (long press)

  • Exit from menu / submenu / set value

  • Exit without saving

PB2

Push-button 2 (short press)

  • Moving “down” in menu / submenu

  • Increasing of set value

PB2L

Push-button 2 (long press)

  • Entry into menu submenu / set value

  • Save and exit

PB3L [1]

Push-button 3 (long press)

  • Entry into stopwatch display

Hint

Long press is activated if the push-button is pressed for longer than 1 second.

Remote Controller Buttons#

Button

Function

<<

  • Moving “up” in menu / submenu

  • Exit from stopwatch display into main screens

>>

  • Moving “down” in menu / submenu

ESC

  • Exit from menu / submenu / set value

  • Exit without saving

OK

  • Entry into menu / submenu / set value

  • Save and exit

MENU

  • Entry into menu from mains screens

  • Entry into menu from stopwatch display

TIMER

  • Entry into stopwatch display from main screens

CLOCK

  • Exit from stopwatch display into clock display

DATE

  • Exit from stopwatch display into date / calendar week display

TEMP

  • Exit from stopwatch display into temperature display

–

  • Decreasing of set value

+

  • Increasing of set value