Network Parameters Assigned by DHCPv4

IP clock mode must be set to IPv4 mode (can be set in NEt menu item n1 setting the value either to 0 or 1). The NEt menu item n3 (DHCPv4 Mode) must be set to value 1. Network parameters are automatically obtained from a DHCPv4 server.

The following DHCP options will be evaluated automatically:

[50]:

IP address

[3]:

gateway address

[1]:

subnet mask

[42]:

list of up to four NTP server addresses / time zone address (usually same as NTP server address)

[6]:

DNS server

[26]:

MTU

[60]:

vendor Class ID

[43] or [223]:

additional options (refer to document BE-800793)

Note

The network administrator must configure DHCPv4 options accordingly. Assigned parameters can be checked in submenu of NEt menu items n4 to n6.