Factory Reset Using Menu#

In an event that the clock gets to state that it does not work properly due to incorrect configuration or it is not possible to connect to the clock via Ethernet, the situation can be solved by invoking the factory settings from the clock menu Factory Reset (SYSt menu item c1).

Procedure#

  1. Enter the digital clock menu using the PB2L push-button or the MENU button on the remote control.

  2. Use PB2 push-button or >> button on the remote control to navigate to the SYSt menu.

    To enter, press the PB2L push-button or the OK button on the remote control.

  3. Use PB2 push-button or >> button on the remote control to navigate to the menu item c1.

    To enter, press the PB2L push-button or the OK button on the remote control. Set value is flashing.

  4. Use the PB2 push-button or the + button on the remote control increase the value to 1.

    FAC inscription flashes.

  5. Confirming the PB2L push-button or the OK button on the remote control will restart the clock to factory settings.