Setting Network Parameters over Autoconfiguration (SLAAC)#
IP clock mode must be set to IPv6 mode (the NEt menu item n1 is set to value 0 or 2 (see IP Mode chapter)).
The NEt menu item 10 must be set to value 1 (see Address Autoconfiguration (SLAAC) chapter). Network parameters are automatically retrieved from a DHCPv6 server.
The following SLAAC options can be processed:
- [3]:
prefix info
- [5]:
MTU
- [24]:
route info
- [25]:
RDNSS
Note
The network administrator must configure SLAAC options accordingly.