MOBATIME Serial Code, MOBALine or IRIG‑B#

  1. Configure the DIP switch to LINES positon (default setting).

    See also

    To configure DIP switch position, you need to dismount the front plexiglass. See Single Sided Mounting and Cable connection chapters.

    ../../_images/dip-lines.svg ../../_images/dip-lines-dark.svg

  2. After connection of the digital clock to the signal source, time and date are adjusted automatically, following the receipt of valid time information.

  3. The time setting with using the serial coded line takes place within at least 5 to 6 minutes, for MOBALine and IRIG‑B within 6 to 15 seconds.

../../_images/impulse.svg ../../_images/impulse-dark.svg ../../_images/impulse-mobile.svg ../../_images/impulse-mobile-dark.svg