Sensor Settings#

The display shows following:

SE N1

Enter digital clock’s main menu and navigate to SEN1 or SEN2 submenu. Enter by pressing the PB2L push-button or the OK button on the remote controller.

Caution

Use SEN1 to configure Sensor 1 and SEN2 to configure Sensor 2.

For consistency, the navigation menu throughout this user guide uses SEN1.

Content#

Sensor Type

Input Number for Sensor One-Wire

Sensor Settings Summary#

Menu Item	Description	Value(s)
t1	Sensor Type	P3, P2, P1, -, 0•, 1, 2, 3, 4, 5, 6, 7, 13, 14, 15
t2	Displayed Temperature Correction	cT*
t3	Temperature Units Display	0, 1•
t4	Temperature Units	°C•, °F
t6	Displayed Humidity Correction	cH*
t7	Humidity Units Display	0, 1•
t8	Humidity Units	rH•, Hr
10	Displayed Pressure Correction	cP*
11	Pressure Units Display	0, 1•
12	Pressure Units	hp•
14	Temperature Preset Value	PT*
15	Humidity Preset Value	PH*
16	Pressure Preset value	PP*
17	Input Number for Sensor One-Wire	1•, 2
22	Communication Protocol Type	1, 2
23	IP Address	IP*

Default values are indicated with •, e.g., 1•.
Values with * have an accessible submenu, e.g., IP*.