Display Blink#
This function enables blinking of the stopwatch display while the stopwatch is running.
Blinking Enable#
When display blink is enabled, the stopwatch display periodically turns off and on during time counting. This provides a clear visual indication that the stopwatch is active and time measurement is in progress.
When display blink is disabled, the display remains continuously visible during stopwatch operation.
Enabling this function adds additional configuration pages for setting the blink period and duty cycle. These configuration pages are hidden when display blink is disabled.
Available Settings#
Value |
Description |
|---|---|
0 (default value) |
Disabled |
1 |
Enabled |
Blink Period#
Defines the duration of one complete blinking cycle (ON + OFF).
Available Settings#
Value |
Description |
|---|---|
5–50 |
Total blink cycle duration Unit: 0.1 s Default: 10 (1.0 s) |
Blink Duty#
Specifies the proportion of time during which the display is visible within one blinking cycle.
Available Settings#
Value |
Description |
|---|---|
10–90 |
Fraction of period during which display is visible Unit: % Default: 75 % |
1
Period 10 (1000 ms), duty 75 % → display ON 750 ms, display OFF 250 ms