Load Channels

If the USB Flash drive is inserted into the USB connector, you are able to load prepared switching programs to Master clock. When loaded, the existing entries in the memory for all switching programs will be deleted.

Switching programs are generated from Switch Editor Basic software.

1

More information about Switch Editor Basic can be found on www.mobatime.com/product/switch-editor-basic.

Place hn60.swprog file into root directory of USB Flash drive. Insert the USB Flash drive into the USB connector.

In Main menu press the > button to select Load channels and proceed to enter its setting by pressing v button.

The display shows the number of records found in the hn60.swprog file:

Save program   ?
Records:     005

Press the v button. Then the switching channel will be loaded into the internal memory and the Master clock will be restarted. After rebooting, you can disconnect the USB Flash drive.

If the required file is not available, the display shows following:

Save program   ?
Records:     000

If you still press v button, the display shows following:

Nothing to save 
                

Button functions:

v:

Save channel records and reset the Master clock

x:

Exit without saving and return to Main menu