Output Blocking#
This function is used to block the striking output.
The function is used if both striking and ringing are connected to the same bells or dulcimers (e.g. death knell). If the Master clock starts striking at the same time of ringing (movement of the bells), striking hammers or bells could be damaged.
The disabling blocking function is provided by the Master clock, which takes information about the movement of the bell from the connected external sensor. It must be positioned so that it can detect the movement of the bells (see Output Blocking chapter). As long as the bells are moving, the striking is blocked, then the blocking is extended by the time set on the first page of the menu.
In Main menu press the button to select Blocking output and proceed to enter its setting by pressing button.
The menu contains two pages:
Button functions:
- :
Switch between pages
- :
Enter item setting on current page
- :
Return to
Main menu