Cable Connection#
Control Board#
Front Side#
Dismounting the front plexiglass
Remove four screws from the back side of the frame.
Remove the front frame and the plexiglass.
Back Side#
- 1:
LINES IN connector (for LGC)
- 2:
TEMP / CTRL connector
- 6:
LAN connector (only for PoE and NTP)
- 7:
100 - 240 VAC (except PoE)
- 8:
DISP2 - connection for second side of the clock
- A:
Push-buttons
Attention
Push-buttons location depend on digit height. For ECO-DC.57 model, push-buttons are located on the upper side of the recess.
- B:
DIP switch (only for LGC variant)
Attention
DIP switch is accessible after removing the front frame and plexiglass.
- E:
Powering LED indication
- F:
State LED
- G:
Link LED
- H:
Activity LED
Wires Connection#
LINES IN Wire Connection#
TEMP Wire Connection#
One or two temperature sensors
CTRL Wire Connection#
Stopwatch control connects to TEMP connector
POWER Wire Connection#
VDC or RP Option Wire Connection#
VDISP Option Wire Connection#
