Offset Settings

In line can be set to time shifts version time on the Master clock – offset.

By default, the offset is set to 0.

By setting a negative / positive value, the time on the line is delayed / overtaken by the value set on the set offset, e.g. at an offset value of -1,00 secons, the time on the line is delayed by 1 second compared to the time on the Master clock

The display shows following:

Offset:   +9,99s
                

Button function in ‘item edit’ mode

< >:

Move between items

+ -:

Switch flasing item (holding down the button will cycle through the options)

v:

Save edited values and return to page view

x:

Exit without save and return to page view

Settings the Offset

Shift range:

-9.99 s to +9.99 s

Adjust step-by-step:

+ / -:

Positive / negative value

0-9:

Units of seconds

00-99:

Tens of miliseconds