Switching Illumination by Calculated Sunrise and Sunset Time

In Main menu press the > button to select Channel setup and proceed to enter its setting by pressing v button.

Calculated times apply to the specified geographic coordinates. For places with specific conditions, it is possible to adjust the time for switching on and switching off the channel.

Adjusting the value to the positive value speeds up the evening switching-on and extends the switching-off time in the morning.

1

Example:

No correction:

19:20–6:32

Correction +10 min:

19:10–6:42

Correction -10 min:

19:30–6:22

Note

To assing channel CH1 to illumination switching, you first need to “free” the channel by changing its value to ‐‐‐ in Program / Manually menu.

The display shows following:

Illu. CH3 K +00m
50°00'N  15a00'E

Illu.:

Channel mode

CH3:

Selected channel

+00m:

Switch correction

50a00’N:

Latitude

15a00’E:

Longitude

Channel Selection

You can set following channels:

CH1–CH2, AUD, ‐‐‐:

Note

The channel cannot be selected if it is already set to manual switch or MUTE switching.

Lighting Switch Correction

You can set the lighting switch correction:

-99m to +99m:

Range of lighting switch correction

Coordinate Range

You can set the coordinate range:

0°00’ to 89°59’ N (S):

Latitude

0°00’ to 179°59’ E (W):

Longitude