Switching MUTE Signal

The menu is used to set the switching of the MUTE signal of the external amplifier and its advance before and after the audio output. It can only be used with a clock with audio output.

The display shows following:

Mute CH2        
pre: 10 post: 05

CH2:

Selected channel

pre: 10:

Advance before audio

post: 05:

Delay after audio

Channel Selection

You can set following channels:

CH1–CH2, AUD, ‐‐‐:

Note

The channel cannot be selected if it is already set to manual switch or lighting switching.

Range of Advance / Delay

You can set the advance before / delay after audio:

pre: 00-99:

(0,0–9,9 s)

Advance before audio output (100 ms unit)

e.g. 10 means that MUTE turns on a second earlier

post: 00-99:

(0,0–9,9 s)

Delay after audio output (100 ms unit)

e.g. 05 means that MUTE switches off 500 ms after