Carillon Connection

PB1, PB2:

Potential-free switching contacts for manual switching of sequences on inputs I1 or I2; the switching contact can be implemented, for example, by a button or switch

Push-button:

The sequence on input I1/IN1 or I2/IN2 is active for at least “T” (can be set in Carillon chapter)

Switch:

The sequence on the I1/IN1 and I2/IN2 input is active for the duration of the switch

Resistors 3.3 kΩ:

Use if the supply wires connected to the inputs are longer than 10 m