Carillon

This item is used to set the carillon parameters.

In Main menu press the > button to select Carillon and proceed to enter its setting by pressing v button.

The display shows following:

T1:00 1S01  2S02
1:2 2:2 3:2 4:2

T1:00:

Minimum repetition time of the activated sequence on input 1 or 2

1S01:

Sequence number activated on input I1

2S02:

Sequence number activated on input I2

1:2:

Output O1; length of output pulses per hammer output in multiples of 100 ms (1–9)

2:2:

Output O2; length of output pulses per hammer output in multiples of 100 ms (1–9)

3:2:

Output O3; length of output pulses per hammer output in multiples of 100 ms (1–9)

4:2:

Output O4; length of output pulses per hammer output in multiples of 100 ms (1–9)

Button function

< >:

Move between items

+ -:

Switch flasing item (holding down the button will cycle through the options)

v:

Save edited values and return to page view

x:

Return to Main menu

1

To set pulse lengths 0.7, 0.5, 0.6 and 0.3 s, set following:

• 1:7

• 2:5

• 3:6

• 4:3