Panel mounting accessible from back side#

Warning

This mounting is only for DC.20.6 panel clock

The DC.20.6…N.F clock is possible to mount only to a panel with maximum thickness 40 mm. Moreover, access from the back side of the panel is necessary.

  1. Prepare a rectangular opening with dimensions 138x60 mm in the panel in the mounting location.

  2. From the back side of the panel interlace all cables which are to be connected to the clock.

  3. Unscrew “L”‑shaped brackets from the top and bottom part of the clock body.

  4. Mount the clock into the prepared opening.

  5. Continue mounting from the back side of the panel.

  6. Screw “L”‑shaped strips back on the clock body.

  7. Secure the clock in the panel by tightening of fastener screws in “L”‑shaped strips.

  8. Connect the interconnecting cables into the corresponding terminals.