Rack mounting

Warning

Mounting is only for DC.20.12x. rack clock

The DC.20x.12…N.R clock designed for the 19‑inch rack has built‑in height of 1U and similar design as other rack‑mounted equipment.

1. Specify a position in the rack with minimal height of 1U.

2. Fasten cage nuts into the vertical rails (the rails are usually part of the rack) on the mounting position of the clock.

3. Interlace all connectors which are to be connected to the clocks (power cord, synchronization, …) to the location of mounting.

4. Connect the interconnecting cables into the corresponding terminals on the clock.

5. Mount the clock into the rack in a way that back parts of the front panel touch the vertical rail at their sides and the four mounting holes are just in front of the cage nuts.

6. Use four M6 screws (again a part of the rack) and secure the clock.