Synchronization Settings#

The synchronization type is preset to DCF.

In Main menu press the > button to select Synchronization and proceed to enter its setting by pressing v button.

The display shows following:

Type:        DCF
                

Button function

+ -:

Change flashing item

v:

Save entered value and return to Main menu

x:

Exit without save and return to Main menu

Options#

Synchronization sources

DCF:

DCF receiver (integrated output) synchronization – also see chapter DCF Connection

MSF:

MSF receiver (DCF input) synchronization

WWBV:

WWVB receivre (DCF input) synchronization

IN1:

Synchronization by external synthetic DCF source – also see chapter Synchronization of Sub-Master Clock Using DCF Current Loop

  • e.g. for combination of Master clock with external GPS receiver

IN1+DCF:

Synchronization by two DCF signals – signal redundancy

  • Primary signal source is IN1 (e.g. external GPS receiver)

  • Switching to a secondary signal source (e.g. DCF receiver) occurs when the primary sihnal is lost

  • The switchback occurs after the primary signal is restored

On this page