Control

The clock is set and controlled by two push-buttons or by remote controller. Position of push-buttons depends on the clock type. Push-buttons are mostly located on the upper side of the frame.

Push-buttons

Button	Description	Function
PB1	Push-button 1 (short press)	Moving “up” in menu / submenu Decreasing of set value
PB1L	Push-button 1 (long press)	Exit from menu / submenu / set value Exit without saving
PB2	Push-button 2 (short press)	Moving “down” in menu / submenu Increasing of set value
PB2L	Push-button 2 (long press)	Entry into menu submenu / set value Save and exit
PB3L	Push-button 3 (long press)	Entry into stopwatch display

Hint

Long press is activated if the push-button is pressed for longer than 1 second.

Remote Controller Buttons

Button	Function
<<	Moving “up” in menu / submenu Exit from stopwatch display into main screens
>>	Moving “down” in menu / submenu
ESC	Exit from menu / submenu / set value Exit without saving
OK	Entry into menu / submenu / set value Save and exit
MENU	Entry into menu from mains screens Entry into menu from stopwatch display
TIMER	Entry into stopwatch display from main screens
CLOCK	Exit from stopwatch display into clock display
DATE	Exit from stopwatch display into date / calendar week display
TEMP	Exit from stopwatch display into temperature display
–	Decreasing of set value
+	Increasing of set value