Control mode#

Menu navigation

Menu:

StoP

Item:

h2

Values:

1, 2, 3, 4, 5, 6

You can choose from several control modes:

Control mode 1#

Note

Default value.

Remote controller button

Push-button

Function

S/S

PB3

Altering START - STOP - UNFREEZE of display (if freezed display)

HOLD

PB1

FREEZE of displayed data with the counter proceeding in counting

RESET

PB1L

Setting the counter to zero in STOP operating mode for counting up, or return to a preset value in all other counting directions
../../_images/control_mode_1_en.svg

Control mode 2#

Remote controller button

Push-button

Function

S/S

PB3

Altering START - STOP - UNFREEZE of display (if freezed display)

HOLD

PB1

First press of push-button causes the display to freeze on the respective time achieved and lets counter running; further activation of push-button shows the intermediate time elapsed from the first press

RESET

PB1L

Reset of the counter in the STOP mode while in counting up, return to preset value in other counting modes
../../_images/control_mode_2_en.svg

Control mode 3#

Remote controller button

Push-button

Function

S/S

PB3

Count up from zero or from preset value in countdown mode, next press of push-button causes the display to freeze and to resume the count from zeroin counting up or from preset value in countdown mode

HOLD

PB1

Unfreeze of display, leaving the counter continue in counting

RESET

PB1L

Counter reset to zero or return to preset value followed with counter stop
../../_images/control_mode_3_en.svg

Control mode 4#

Remote controller button

Push-button

Function

S/S

PB3

Triggering the counter

HOLD

PB1

Stopping the counter

RESET

PB1L

Resetting the counter or return to preset value with counter stop
../../_images/control_mode_4_en.svg

Control mode 5#

Remote controller button

Push-button

Function

S/S

BRB10

Alternately:

  1. Start

  2. Stop

  3. Reset
../../_images/control_mode_5_en.svg

Control mode 6#

Remote controller button

Push-button

Function

S/S

BRB10

Alternately:

  1. Stopwatch display + Start

  2. Stop

  3. Default display + Reset
../../_images/control_mode_6_en.svg

Hint

Default display can be set in dISP menu item d3 (Time Constants):

  1. Display OFF

    If the dISP menu item d3 is set to value 4 (continuous display of stopwatch), the display will switch OFF after the expiration of idle period or short press of button.

  2. Display Time, Date or Temperature

    If the dISP menu item d3 set to value 0, 1, 2, 3, 5, 6 or U, the display will switch to either Time, Date or Temperature display after a expiration of idle period or short press of button.

On this page