Cable Connection#
Control Board#
DSC.100#
DSC.180 and Above#
Description
1 |
LINES / DC OUT connector (only for LGC variant) |
2 |
TEMP connector |
3 |
RS 485 connector (only with RS 485 option) |
4 |
USB connector (only for LGC variant and GPS option) |
5 |
RELAY connector (only for option REL / REL-IP) |
6 |
LAN connector (only for PoE and NTP variant) |
7 |
POWER (except PoE variant) |
8 |
DISP2 – connection for second side (for DSC.180 and above, the DISP2 connector is placed outside of the control board) |
9 |
CTRL connector |
A |
Push-buttons PB1, PB2 |
B |
DIP switch (only for LGC variant) |
C |
Battery (BAT option) |
D |
Connecting / disconnecting the backup battery (BAT option) |
E |
Powering LED indication |
F |
State LED |
G |
RESET button |
Connection#
LINES / DC OUT Wire Connection#
TEMP Wire Connection#
One or two temperature sensors
CTRL Wire Connection#
RS-485 Wire Connection#
RELAY Wire Connection#
POWER Wire Connection#
VDC or RP Option Wire Connection#
VDISP Option Wire Connection#
